|
Mitsubishi - Mazda - Toyota -
Subaru - Honda.
Vipec has produced replacement ECU boards and adaptors
for the original ECU on Mitsubishi EVO 1,2,3,4,5,6,7,8
and 9. Subaru WRX 1995-96, 1997-98, 1999-00 and 2001-2007.
Mazda MX5 and RX7. Toyota GT4 and MR2. Nissan SR and
RB engines.
The original motherboard and connector are removed
from the ECU case, and the ViPEC motherboard and connector,
clips or screws into the case. The original harness
plugs in and the job is done, no wiring and all original
sensors are used. External view of ECU case and connector
is unchanged from its stock appearance.
Most plug-in ECU have an internal 2.5 bar map sensor.
Optional 7 bar map sensor available. External map sensors
also supported.
Considerable gains in power across the complete RPM
range can be achieved with these boards. Both road car
and Group N rally car versions available.
Allows full control over fuel, ignition timing, boost
pressure and all other engine functions. All boards
have QuickTune software and optional Anti-lag.
All boards are supplied with base programs
are available. Some final tuning will be required.
Feature Comparison
for V44, V88 and plug-in ECU
Note: Click on image for a larger view.
Nissan Skyline
(RB20, RB25, RB26). Replacement ECU board.
Based on the V44 model ECU
See documentation
for installation manual. |
|
Nissan Skyline
R34. Replacement ECU board.
Based on the V44 model ECU
See documentation
for installation manual. |
|
|
Nissan S13 - S14 (CA18 - SR20).
Replacement ECU board.
Based on the V44 model ECU
See documentation
for installation manual.
|
 |
|
Nissan S14 - S15 (SR20). Replacement
ECU board.
Based on the V44 model ECU
See documentation
for installation manual.
|
 |
Subaru WRX 1994
to 1996 replacement board.
Based on the V44 model ECU
See documentation
for installation manual. |
|
Subaru
WRX 1997 to 1998 replacement board.
Based on the V44 model ECU
See documentation
for installation manual. |
|
Subaru WRX 1999
to 2000 replacement board.
Based on the V44 model ECU
See documentation
for installation manual. |
|
Subaru WRX 2001 to 2007
replacement board.
Based on the V44 model ECU
See documentation
for installation manual.
|
|
Mitsubishi Lancer
EVO 9 replacement board. Allows full control of
MIVIC.
Based on the V44 model ECU
See documentation
for installation manual. |
 |
Mitsubishi Lancer EVO 4, 5, 6, 7, 8 replacement
board.
Based on the V44 model
ECU.
See documentation
for installation manual.
|
|
Mitsubishi Lancer EVO 1, 2, 3 and Eclipse
Based on the V44 model
ECU.
See documentation
for installation manual.
|
|
Mitsubishi Legnum/GTO
Based on the V44 model ECU |
|
Mitsubishi Lancer EVO 1, 2, 3 replacement board.
Based on the V44 model
ECU.
See documentation
for installation manual.
|
|
|
Honda Civic 1996-99 (OBD2).
Based on the V44 model ECU
See documentation
for installation manual.
|
 |
Honda Civic 1992-95 (OBD1)
Based on the V44 model
ECU
See documentation
for installation manual.
|
|
Mazda MX5/Miata/GTX
Based on the V44 model
ECU
See documentation
for installation manual.
|
|
Mazda RX7 Series
6
Based on the V44 model ECU
See documentation
for installation manual. |
 |
Holden VL Commodore.
Secquential injectors with 6 x low Impeadnce drivers.
Based on the V44 model ECU |
 |
Toyota MR2/Celica
ST205
Based on the V44 model ECU
See documentation
for installation manual. |
 |
Toyota MR2/Celica
ST185
Based on the V44 model ECU
See documentation
for installation manual. |
|
Toyota 2JZ-GTE
VVT-i plug-in V88 adaptor. Uses the V88 standalone
model ECU. Controls electronic throttle and VVT-i.
See documentation
for pinout information. |
 |
Toyota Supra
1993-98 2JZ-GTE plug-in V88 adaptor. Uses the V88
standalone model ECU.
See documentation
for pinout information. |
 |
|
Subaru 2.5L WRX and STi 2006 to
2007 plug-in V88 adapter. Controls electronic
throttle. Allows full control of AVCC and all
other engine based controls.
Uses the V88 standalone model ECU.
See documentation
for pinout information.
|
 |
|
